Protecting Against DNS Vulnerabilities: Strategies and Best Practices

Domain Name System (DNS) vulnerabilities pose significant threats to organizations worldwide. These attacks exploit weaknesses in the DNS protocol, leading to dire consequences such as data theft, network breaches, and service disruptions. As the digital landscape evolves, so do the techniques employed by malicious actors, making it imperative for businesses to fortify their defenses. In this article, we delve into common DNS attacks, their implications, and proactive measures organizations can take to prevent them, including the adoption of Zero Trust Network Access (ZTNA) and strict access controls.

DNS Attacks: A Growing Concern

DNS attacks have become pervasive in today’s interconnected digital ecosystem. According to a 2021 IDC survey encompassing over 1,100 organizations globally, a staggering 87% reported experiencing DNS attacks. These incidents incurred substantial financial losses, with an average cost of approximately $950,000 per attack. Notably, the shift towards remote work and cloud migration amid the COVID-19 pandemic has expanded the attack surface, providing assailants with new targets.

Common DNS Attack Vectors

  1. DNS Amplification: DNS amplification attacks involve exploiting open DNS servers to flood target systems with excessive DNS response traffic, thus triggering Distributed Denial of Service (DDoS) attacks. This method is highly effective because it leverages the inherent behavior of DNS servers to provide large responses to small queries. Attackers often spoof their source addresses, making it appear as though the requests are coming from legitimate sources. By doing so, they maximize the amplification effect, causing a significant volume of traffic to be directed towards the target’s infrastructure. DNS amplification attacks can overwhelm network resources, rendering services inaccessible to legitimate users. Mitigation strategies typically involve securing and properly configuring DNS servers, implementing rate limiting, and deploying DDoS protection mechanisms.
  2. Distributed Reflection Denial of Service (DRDoS): Distributed Reflection Denial of Service (DRDoS) attacks exploit open DNS resolvers to amplify and reflect traffic towards a target, thereby overwhelming its resources and causing denial of service. Unlike traditional DDoS attacks where the attacker directly floods the target with traffic, DRDoS attacks abuse the functionality of DNS resolvers to magnify the impact of the attack. The attacker sends requests to open DNS resolvers, spoofing the source IP address to make it appear as if the requests originate from the victim’s network. The DNS resolvers then respond to these requests, directing the amplified traffic towards the victim’s infrastructure. This technique allows attackers to generate a massive volume of traffic while concealing their own identity. To mitigate DRDoS attacks, organizations should implement measures such as source IP validation, rate limiting on DNS resolvers, and network filtering to block spoofed traffic.
  3. DNS Spoofing/Cache Poisoning: DNS spoofing, also known as cache poisoning, involves manipulating DNS servers to inject fraudulent or malicious data into the cache of DNS resolvers. By doing so, attackers can redirect users attempting to access legitimate websites to malicious ones controlled by the attackers. This tactic is often facilitated through techniques such as DNS cache poisoning, where attackers exploit vulnerabilities in DNS software or protocols to inject false DNS records into the cache. DNS spoofing attacks can be initiated through various means, including phishing emails, malware-infected systems, or compromised DNS servers. The consequences of DNS spoofing can be severe, as it compromises data integrity, exposes users to phishing scams, and facilitates the distribution of malware. To mitigate DNS spoofing attacks, organizations should regularly update DNS software, implement DNSSEC (DNS Security Extensions) to authenticate DNS responses, and deploy Intrusion Detection Systems (IDS) to detect anomalous DNS traffic.
  4. DNS Tunneling: DNS tunneling attacks involve exploiting DNS protocols to establish covert communication channels between a client and a server for the purpose of data exfiltration or malware propagation. Unlike traditional communication channels, DNS tunnels leverage DNS queries and responses to transmit data, allowing attackers to bypass network security measures such as firewalls and Intrusion Detection Systems (IDS). In DNS tunneling attacks, malicious payloads are encoded into DNS queries or responses and transmitted between the client and the server. This technique enables attackers to evade detection and exfiltrate sensitive data without raising suspicion. To mitigate DNS tunneling attacks, organizations should implement DNS traffic monitoring and analysis tools, deploy DNS firewall solutions to detect and block malicious DNS traffic, and enforce strict egress filtering policies to prevent unauthorized DNS communications.
  5. Fast Flux: Fast flux is an evasion technique used by attackers to hide malicious activities, such as phishing scams and malware distribution, by constantly changing the IP addresses associated with a legitimate domain. In a fast flux setup, attackers employ botnets to rapidly switch between multiple IP addresses, making it difficult for security analysts to track and block malicious activities. By leveraging dynamic IP swapping, attackers can prolong the lifespan of their malicious infrastructure and evade detection by security tools. Fast flux can be particularly challenging to mitigate due to its dynamic nature and the large number of IP addresses involved. However, organizations can implement measures such as network traffic monitoring, IP reputation-based blocking, and domain reputation analysis to detect and mitigate fast flux attacks.
  6. DNS Hijacking/Redirection: DNS hijacking or redirection involves compromising DNS resolution processes to redirect users attempting to access legitimate websites to rogue servers controlled by attackers. This can be achieved through various means, including malware infections, router compromise, or unauthorized modifications to DNS configurations. Once compromised, DNS settings are altered to point legitimate domain names to malicious IP addresses controlled by the attackers. This enables attackers to intercept sensitive information, such as login credentials or financial data, and perpetrate phishing scams or other malicious activities. To prevent DNS hijacking attacks, organizations should implement robust security measures, including DNSSEC to ensure the integrity of DNS responses, DNS monitoring to detect unauthorized changes, and regular audits of DNS configurations to identify and mitigate potential vulnerabilities. Additionally, end-user education and awareness training can help mitigate the risk of falling victim to DNS hijacking attacks through social engineering tactics such as phishing emails.
  7. NXDOMAIN Attack: In an NXDOMAIN (Non-Existent Domain) attack, attackers flood DNS servers with requests for non-existent domain names, causing the server to respond with NXDOMAIN responses. This type of attack consumes server resources and can lead to denial of service for legitimate users. NXDOMAIN attacks exploit vulnerabilities in DNS infrastructure by flooding servers with a high volume of requests for domain names that do not exist. As a result, the DNS server is forced to process these requests and generate responses indicating that the requested domains are not found. This consumes computational resources and bandwidth, potentially causing the DNS server to become overwhelmed and unresponsive. To mitigate NXDOMAIN attacks, organizations can implement rate limiting, DNS query filtering, and traffic analysis tools to detect and block malicious traffic patterns.
  8. Man-in-the-Middle (MitM) Attacks: Man-in-the-Middle (MitM) attacks on DNS traffic involve attackers intercepting communication between a user and a DNS server, allowing them to eavesdrop on the traffic, manipulate DNS responses, or inject malicious content. In a MitM attack, attackers typically position themselves between the user and the DNS server, intercepting DNS queries and responses as they traverse the network. By doing so, attackers can tamper with DNS responses, redirect users to malicious websites, or even spoof legitimate domain names to launch phishing attacks. MitM attacks on DNS traffic can be facilitated through various means, including ARP spoofing, DNS cache poisoning, or exploiting vulnerabilities in network protocols. To mitigate MitM attacks, organizations should implement encryption protocols such as DNS over HTTPS (DoH) or DNS over TLS (DoT) to protect DNS traffic from interception and tampering. Additionally, network segmentation, intrusion detection systems (IDS), and certificate validation mechanisms can help detect and prevent MitM attacks on DNS traffic.

Protective Measures Against DNS Threats

Addressing the multifaceted nature of DNS threats necessitates a holistic and proactive security approach, encompassing technical controls, user education, and continuous monitoring.

  1. Implement Strong Access Controls: Enforce multi-factor authentication (MFA) to bolster access security and thwart unauthorized entry. Avoid password reuse and ensure robust password management practices across all DNS-related accounts and systems.
  2. Implement DNSSEC: Deploy DNS Security Extensions (DNSSEC) to authenticate DNS responses and thwart DNS spoofing attacks. DNSSEC enhances data integrity and authenticity, bolstering trust in DNS infrastructure and mitigating the risk of fraudulent DNS records.
  3. Utilize DNS Filtering: Employ DNS filtering solutions to block access to known malicious websites and prevent users from inadvertently visiting fraudulent domains. By proactively identifying and blocking malicious DNS queries, DNS filtering technologies mitigate the likelihood of successful spoofing and poisoning attacks.
  4. Conduct Regular Vulnerability Assessments: Routinely perform vulnerability assessments and penetration tests to identify and remediate weaknesses in DNS infrastructure. Proactive vulnerability management minimizes the risk of exploitation by malicious actors and enhances overall network security posture.
  5. Educate Users: Raise awareness among users about the risks of DNS attacks and emphasize the importance of verifying website authenticity, exercising caution when clicking on links, and promptly reporting suspicious activity. Ongoing education and training initiatives empower users to recognize and respond to potential threats effectively.
  6. Implement Zero Trust Network Access (ZTNA): Embrace a Zero Trust approach to network security, abstracting access mechanisms and granting permissions based on user identity, device posture, and contextual factors. Deploy ZTNA and identity-based network segmentation to limit lateral movement within the network and enhance resilience.
  7. Monitor DNS Traffic: Implement robust monitoring and logging mechanisms to track DNS traffic and detect anomalous behavior indicative of potential attacks. Real-time monitoring facilitates rapid incident response, minimizing the impact of attacks and enabling timely remediation efforts.

Conclusion

DNS vulnerabilities pose significant risks to individuals and organizations, compromising trust in online communications and threatening data integrity. By comprehensively understanding DNS attacks and implementing proactive protective measures, stakeholders can fortify their defenses and mitigate the risk of falling victim to DNS-based threats. In an era of escalating cyber threats, proactive defense strategies, including the adoption of ZTNA, and ongoing vigilance are essential for safeguarding digital infrastructure and preserving trust in the interconnected world of the internet.

Peplink: Take Control of Your Management Software

So, you have purchased a Peplink Router—Congratulations! This can be an exciting prospect for many users looking to implement Peplink products into their network or use Peplink as their primary source of Internet. One of the most popular reasons for purchasing a Peplink is their remote management service, this comes in the form of the Peplink InControl 2 website (IC2) and the Peplink app, or basic local administration from the router itself. New Peplink users can find these options a little daunting. 5Gstore is here to help you get started! We will discuss the different ways you can manage your Peplink devices and some issues that may occur when using them.

InControl 2 Cloud-Based Management

Network management requires constant maintenance, standardization of device configurations, monitoring of network health and urgent troubleshooting. If you are a general home user or an experienced technician monitoring large networks, Peplink’s InControl 2 cloud-based remote manager has you covered. This cloud-based management platform empowers users with unparalleled oversight and control over their Peplink devices, all accessible through the convenience of any web browser. Whether it’s deploying mass configuration changes, monitoring real-time network stability or responding to unexpected issues, InControl 2 streamlines these tasks with a very user-friendly interface. When it comes to managing even a single router with InControl 2, you do not have to be a networking engineer. In fact, in most cases, configuring settings through InControl 2 is easier than manually configuring the router from its administrative graphical user interface (GUI).

Peplink App

The Peplink app provides users with the convenience of managing their network from anywhere, at any time. Optimized for mobile devices, the app allows users to quickly access key networking features, monitor the health and performance of their Peplink devices, and receive instant alerts. While it offers a more condensed interface than its web-based counterpart, the Peplink app is engineered for efficiency, ensuring that essential functions are easily accessible. Whether you’re troubleshooting on the go, adjusting configurations, or checking the status of your network, the Peplink app simplifies network management. The app is currently available on Android and iOS devices to provide flexibility and control over your network.

Local Web Administration

As with all routers, Peplink is configurable directly from the device itself. This is accomplished by connecting to the router’s wifi or connecting a pc or laptop to one of your device’s LAN ports. Once connected you can visit the device’s web admin by opening a browser (Google Chrome, Firefox, etc.) and typing in the IP address of your router. For Peplink this will either be 192.168.50.1 or 192.168.1.1, depending on if the Peplink is a Pepwave MAX or a Peplink Balance router. This will give you full access to your router’s configuration. When comparing this option to the previously discussed InControl 2 and Peplink app, most users may find configuring their Peplink unit to require more effort and knowledge of router settings. 

Which Management Option Is Best?

Choosing the right management tool for your Peplink devices can significantly improve your networking experience. 5Gstore personally recommends InControl 2 if you want as much control as possible from anywhere at any time and while the Peplink app offers convenience for basic management tasks on the go, Peplink’s InControl 2 platform stands out as the superior choice for comprehensive network management. InControl 2 provides a unified dashboard that allows you to monitor and manage all of your Peplink devices across multiple locations.

 This platform excels in its depth of features and will continue to be the leading management platform from Peplink when it comes to getting new updates and features. InControl 2 management can also be shared to anyone that you want to have access to assist in your networking management and the amount of access that you provide another user can be adjusted.

If you are a 5Gstore customer this provides an added bonus to your 5Gstore tech support. Having a problem with your configuration and not sure where the problem is? As a 5Gstore customer you can add our tech support agents directly to your InControl 2 group for hands-on assistance from your rep. 5Gstore does not directly support the Peplink app and providing hands on support is not always an easy task when using the local web admin. However, if you are still deciding which way to manage your Peplink, below is a general guideline for each option based on use case!

  • Peplink App – Configure router settings remotely with a simplified user interface on a mobile device
  • Web Admin – Configure basic to advanced router settings in 1 router on a desktop
  • InControl 2 – Monitor the status of multiple routers, with quantities varying from a few to hundreds, and apply configurations to the devices (e.g. firmware upgrade schedule, outbound policy) all at once.

Can All 3 Options Be Used At The Same Time?

This is where management can be a bit more complex. You can essentially have access to all 3 options, but if you allow InControl 2 to manage your settings you will have a limited view of certain details within the app such as Data usage/WAN quality, and Connected devices. As for the InControl 2 and the Peplink app you must choose which one to place in control of your settings. InControl 2 and the Peplink app will override any changes made directly from the router login and will compete for control. If you choose to use InControl 2 first when you access the app you will be warned that InControl 2 is managing your settings already. If you’re unsure which one to use, refer back to the suggested use cases for each one. 

Troubleshooting Issues That May Occur When Using The App or InControl2

If you have managed to configure your router, but you are running into issues with conflicting settings you aren’t sure how to resolve, here are some common issues that you may encounter along with steps to assist you in fixing them. 

The App Shows That My Router Is Registered On InControl 2 And I Cannot Proceed, What Should I Do? 

This message is displayed when the router is already registered inside a group on InControl 2, and the group setting of “Allow managing devices in Peplink App” is set to “No”. To give access rights to the Peplink app, the admin of the group must change the setting to “Yes” first. You can then tap “The setting has been updated” to try again. Follow the steps below to make this change:

Login to your InControl 2 account. From here you will need to navigate to the Group level from your main Organization. In the image below you can see the Organization>Group Name and it shows that you are on the Group Level. 

Hover over the “Settings” Icon and you will see a drop down menu with Group Settings at the bottom, Click this option. You will be brought to a new section and you will need to scroll down to the “Peplink App” section.

I Am Trying To Make Changes To My Router Via The App But My Changes Are Reverting Back To The Previous Settings. What should I do?

This issue is most likely due to settings being applied from InControl 2 first and then trying to alter the settings later from the Peplink app. We recommend accessing the web admin of your router and checking to see if the following message is displayed for your settings on the router.

If you see this message then InControl 2 is currently managing your settings. You will need to login to your InControl 2 account and remove the InControl 2 managed settings and make sure “Allow managing devices in Peplink App” is set to “Yes”

It is important to note that if you are managing settings with InControl 2 and don’t remove the IC2 settings and allow app control you may encounter issues with your Peplink settings.

If you are not seeing that message and are still having issues and are unsure of which steps to take, it may be necessary to disable InControl 2 management entirely from within your router and see if the issue is resolved. You can do this by accessing the Web Admin of your Peplink and navigating to Status>Incontrol 2> and disable Incontrol 2 management.

When in doubt, always double check that your settings aren’t currently being managed somewhere else if you are having trouble applying settings from one of the management options. Of course, if you have purchased your Peplink device directly from 5Gstore you can call our helpful support agents at 833-547-8673 Mon – Fri 9am-6pm Central Daylight Time.

Cloud Management Services for Cellular Routers 

What They Are & Why You Should Use Them

When you purchase some sort of electronic device, you normally have the option of purchasing an extended warranty for it. This might not only give you the option of hardware replacement, but added benefits. When it comes to routers – like the ones we carry from Cradlepoint, Digi, Inseego, Peplink, and Sierra Wireless – you may also have the added benefit of a cloud management service. 

What is a Cloud Management Service? 

This is essentially a website you can log into from anywhere in the world and both monitor and manage your routers remotely. Of course, in order to be able to do this, you must have a valid warranty and or cloud subscription for each of your routers. 

Why Should I Use a Cloud Manager?

Cloud management services are somewhat similar to device registrations with the manufacturer. It proves you own the device and protects it from being added to another user’s management account. They help to keep an eye on your devices by monitoring the health of the device, its uptime, and signal strength. Configurations are streamlined, as it allows you to get devices online more quickly.

What Benefits Do Cloud Managers Provide?

Other than remote visibility of your routers’ connection status in real-time, there are several benefits to having cloud management service for your devices. 

  • Lower Overall Management Costs: Reducing the cost of configuring and deploying your devices through a single platform.
  • Increased Productivity: Manage multiple devices at the same time and reach your goals more quickly and efficiently.
  • Maintenance: Minimizing the cost of keeping your devices current and secure with easy deployment of software and security updates.
  • Security: Lock down access to your devices to authorized personnel and improve the overall security on your networks. 

Common features include:

  • Configuration by device or group
    • Save time by setting up configurations that can then be uploaded to your device or groups of devices. Most devices support Zero touch provisioning (ZTP), which allows you to automatically deploy device configurations over a network connection.
  • Data usage tracking and alerts
    • Avoid overage fees by staying up to date on how much data your device(s) are using. 
  • GPS tracking
    • Verify where your device has traveled in the past or view it in real time.
  • Firmware update
    • Ensure proper maintenance for your device(s) by upgrading firmware as needed. This can sometimes be done for a group of devices also.
  • Device diagnostics for troubleshooting
    • Use tools like ping and traceroute to verify how traffic is flowing on your network. Additionally, you may reboot your device as needed or in some cases, you may set a reboot schedule. 

Less Common Features

  • Remote access to the web UI
    • Use the management service to log into your device remotely, just like it works locally, or similarly.
  • Remote Access to devices on the LAN of the router
  • VPN Connectivity and simple configuration
    • Link devices with the use of VPN, which can easily be configured through the cloud manager.
  • API support
    • The API is an interface for developers to integrate their systems and/or scripts with the data available in the cloud manager. This may include online/offline status of routers and network interfaces, signal strength and quality of cellular modems, router logs, and more.
  • Fast Renewal Activation
    • Renewing service can be a real pain, but not when it comes to processing licenses for Peplink at 5Gstore.com. We have an automated system that allows you to enter your Peplink serial number in our website search field and it will report back compatible licenses. Once your license is purchased, it takes mere minutes to be processed.

Some warranties include these cloud services and in those cases, the cloud service is valid for as long as the warranty is. Here’s what each manufacturer offers:

Cradlepoint NetCloud 

  • Warranty, support and cloud management services are bundled under the NetCloud subscription, which is available for 1, 3 or 5 years.
    • Features include:
      • Bulk configuration and firmware updates
      • Troubleshooting and diagnostic tools
      • Custom alerts and reports
      • Location services and coverage mapping
      • Cellular plan monitoring and forecasting
      • API option

Digi Remote Manager

  • Cloud service is available through a license separate from the device warranty. Premier service plans are available for 1, 3, or 5 years.
    • Features include:
      • Configuration manager
      • Location mapping
      • Bulk firmware upgrades
      • Out of Band Management
      • Alarms and On-Demand Reports
      • Web Service APIs

Inseego Connect

  • Basic management is included for the life of the device, but has limited features compared to their Standard and Advanced plans. It is mainly for device inventory and status monitoring. Standard is best for focusing on monitoring device health and remotely configuring devices. Advanced includes all the standard features plus additional analytics and insights into how devices are being utilized. These are both available for an additional fee for 1 or 3 years. Note that when purchasing the Advanced plan, this includes warranty and support, also for 1 or 3 years.
    • Features include:
      • Bulk Configuration of groups of devices
      • Location mapping
      • Access to key health metrics
      • Data usage tracking
      • Set alerts and perform diagnostics
      • Firmware updates

Peplink InControl 2

  •  Cloud management is included with a valid warranty, of which it is 1 year standard. Optional warranty extensions are available at 1, 2 or 4 years. For non-PrimeCare Velocity and Volume-Based series devices you also have the option for 1 or 2 years of cloud management only.
    • Features include:
      • Bulk configuration
      • Remote access to web UI and devices on the LAN
      • GPS fleet management
      • Troubleshooting tools
      • API option

Sierra Wireless/ Semtech AirLink Management Service

  • Warranties include support and cloud management for 1 year. Upgrades are available for 1 year on AirLink devices.
    • Features include:
      • Mass configuration
      • Location mapping
      • Device alerts and reports
      • Firmware upgrades
      • Data usage tracking
      • Diagnostic tools
      • Web services API

How Much Data Will Cloud Manager Services Use?

You may also be wondering how much data usage the Cloud Service is going to require. This is especially important for users who have limited data plans for M2M or IoT applications. Let’s take a look at the minimum usage for each system. 

Cloud Management ServiceMinimum Data Usage
Cradlepoint NetCloudData usage ranges from 5-10 MB per router per month in typical scenarios. Settings like connection pulse intervals significantly impact usage. Faster pulses increase data usage, while slower pulses risk connection issues but save data.
Digi Remote ManagerWithout updates and default settings, it uses approximately 4.68 MB on cellular and 18.1 MB on non-cellular connections monthly. However, if all features are enabled, it can go up to 263 MB monthly. To minimize data usage, users can disable non-essential features like event logging and adjust keep-alive intervals. 
Inseego ConnectAverage is 100 MB monthly, but this can increase depending on usage. While this service doesn’t offer extensive customization options, being mindful of data-intensive activities can help minimize usage.
Peplink InControl 2Monthly data usage averages 339.7 MB with GPS enabled and 172.3 MB with GPS disabled. Users can optimize data consumption by adjusting reporting metrics. Enabling Low Data Usage Mode in particular, significantly reduces data usage, down to 6.9 MB with GPS enabled and 1.3 MB with GPS disabled.
Sierra Wireless/ Semtech AirLink Management ServiceWith default configurations, devices use around 2.7 MB/day without telemetry and 3.3 MB/day with telemetry. Disabling both telemetry and the Network Watchdog reduces usage to approximately 400 KB/day. 

What Happens When I Don’t Renew My Cloud Management Service?

Most manufacturers will include some sort of cloud service with the purchase of the hardware. This may make you more inclined to use it, but what happens when the service expires? While in most cases, you can still log in and view past data, most or all remote management features are lost. This includes the ability to log into your device or devices behind it, firmware upgrades, and GPS as well as data usage tracking. 

ManufacturerIncluded Cloud ServicePost Expiration Functionality
Cradlepoint1, 3 or 5 yearsSome, or all features become unusable. More info
DigiNoDevice reports no longer available, including data usage. Individual Device Stream data is retained, and could be accessed via the API.
InseegoBasic plan for life of deviceRemote management and data tracking is unavailable.
Peplink1 yearRemote access, configuration, and data tracking is lost. Past reports are still accessible.
Sierra Wireless/ Semtech1 yearRemote management and data tracking is lost.

How Do I Renew My Cloud Management Service?

  • Cradlepoint: Alerts are sent to the admin at 90 days before expiration and again at 30 days before expiration, if no order has been placed. If you choose to renew after your devices have expired, there may be a 10% reinstatement fee applied. Simply contact sales@5gstore.com with your device serial number(s) and email address associated with your Cradlepoint NetCloud account and we’ll follow up with a quote. 
  • Digi: When it comes time to renew your Digi devices, you may purchase subscriptions per device, right at 5Gstore.com. Note your device serial number(s) and the email on the Digi Remote Manager account is needed at checkout. 
  • Inseego: At renewal time, go to 5Gstore.com and purchase the subscription of your choice. You will need to enter the device IMEI number(s) at checkout. 
  • Peplink: Alerts are sent at least 30 days prior to expiration of your Care plan, and a 30 day grace period is provided after expiration, if needed. After the 31st day from the Care Plan expiration date, a diagnostic report is required to be submitted and verified by Peplink. You may either email sales@5gstore.com with your Diagnostic Report or submit it at checkout. Not sure what license you need? Just enter your device’s serial number in the 5Gstore.com search bar and it will populate compatible licenses. Our team can also assist you with selecting the appropriate license for your needs. 
  • Sierra Wireless/ Semtech: Contact sales@5gstore.com with your device serial number(s) and email address associated with your AirLink Management Service account, along with your account UID, and we’ll follow up with a quote. 

How Much Will it Cost to Renew Cloud Management Service?

Want to get an idea of the yearly costs for the cloud service? Here is a breakdown of the costs by manufacturer: 

Manufacturer1 year renewal3 year renewal5 year renewal
CradlepointStarts at $72Starts at $216Starts at $360
Digi$48$126$210
Inseego$19.99$49.99N/A
Peplink*$29 (cloud only)/ $49 and up (Care plans)$49 (2 year cloud only)/ $98 and up (Care plans)N/A
Sierra Wireless/ Semtech$30 (RV, RX, LX, MP Series)/ $90 (XR Series)$90 (RV, RX, LX, MP Series)/ $270 (XR series)$150 (RV, RX, LX, MP Series)/ $450 (XR Series)
*Cloud only subscriptions apply to Velocity & Volume-Based series devices. PrimeCare and PrimeCare+ or EssentialCare and EssentialCare+ prices range, depending on the device model.

Is Cloud Management Service Right For You?

Whether you have one device to manage, or multiple devices, a cloud management solution could save you both time and money. In most cases this is best for administrators that need to manage several local and/or remote devices. However it can also be helpful for single device users as well. Features like data and client data usage tracking capabilities, as well as device diagnostic tools could prove beneficial.   

If after reading this you’re still unsure as to whether or not you want to use a cloud management service, reach out to our team for assistance. We’re available Monday through Friday from 9am to 6pm CT at 833-547-8673 or sales@5gstore.com

Understanding TAA Compliance

In an increasingly interconnected global economy, trade agreements play a pivotal role in shaping business practices and economic relationships between nations. One such agreement that holds significant importance for companies seeking to do business with the U.S. government is the Trade Agreements Act (TAA). TAA compliance is not just a legal requirement; it’s a commitment to ethical business practices, fair trade, and supporting domestic economies. 

There are 3 categories of TAA-compliant products. This includes the following:

  • Domestic end products – made entirely in the United States
  • Designated country end products – made in a country that has a trade agreement with the United States 
  • Foreign end products – made outside of the United States and do not meet the requirements for designated country end products

In this article, we delve into what it means to be TAA compliant, why it’s important, the requirements for compliance, and the benefits it offers.

What Does it Mean to be TAA Compliant?

At its core, TAA compliance refers to adherence to the guidelines set forth by the Trade Agreements Act, a federal law governing government contracts and procurement. The primary objective of TAA is to foster fair and open international trade while ensuring that products purchased by the U.S. government are manufactured in designated TAA-compliant countries. These countries include Taiwan, Canada, Mexico, Australia, Japan, Germany, and many others. The full list of TAA-compliant countries can be found on the General Services Administration (GSA) website.

Why is TAA Compliance Important?

The significance of TAA compliance extends beyond mere regulatory adherence. It serves as a testament to a company’s commitment to ethical business practices and fair trade. Here’s why TAA compliance is crucial:

  1. Support for Fair Trade Practices: TAA compliance ensures that the U.S. government upholds fair trade practices, avoiding inadvertent violations of international trade agreements.
  2. Economic Protection and Job Support: By promoting the purchase of products made in the U.S. or designated TAA-compliant countries, TAA compliance supports domestic economies and American workers.

What is Required to be TAA Compliant?

Achieving TAA compliance involves meeting specific requirements outlined by the Trade Agreements Act:

  1. Designated Country Status: Companies must operate in a designated country, including the U.S., EU countries, and nations with free trade agreements with the U.S.
  2. Origin of Products or Services: Products or services sold to the government must be manufactured or substantially transformed in a designated country, ensuring compliance with TAA regulations.
  3. Accurate Record-Keeping: Maintaining meticulous records of products/services sold to the government and their country of origin is imperative. A comprehensive compliance program outlining policies and procedures must also be in place.
  4. Compliance with Domestic Sourcing Requirements: In addition to TAA, compliance with the Buy American Act (BAA) is also necessary, ensuring a percentage of a product’s components are sourced domestically.

Benefits of TAA Compliance

TAA compliance offers several benefits for businesses:

  1. Government Contract Eligibility: TAA compliance is a prerequisite for bidding on and winning government contracts, providing access to a lucrative market segment.
  2. Global Market Access: Compliance facilitates entry into global markets through trade agreements, expanding opportunities for growth and revenue generation.
  3. Enhanced Reputation: Demonstrating commitment to ethical practices enhances a company’s reputation, fostering trust among stakeholders and attracting new business opportunities.
  4. Risk Mitigation: Compliance mitigates the risk of penalties and legal repercussions associated with non-compliance, safeguarding the company’s interests.
  5. Meeting Customer Requirements: Many private sector companies also prioritize TAA compliance, ensuring alignment with customer expectations and retaining existing business relationships.
  6. Improved Supply Chain Management: TAA compliance necessitates robust supply chain management practices, leading to efficiency and transparency in operations.

Tips for Maintaining TAA Compliance

To ensure ongoing compliance, businesses should:

  1. Understand TAA requirements thoroughly.
  2. Stay updated on regulatory changes.
  3. Implement internal controls and conduct regular audits.
  4. Provide comprehensive training to employees.
  5. Work with reputable suppliers and vendors.
  6. Maintain accurate records of compliance efforts.

TAA-Compliant Devices and Suppliers

Companies like Cradlepoint, Digi, Inseego, Peplink, and Sierra Wireless (now Semtech) offer TAA-compliant products, ensuring adherence to regulatory standards and ethical manufacturing practices. Contact the sales team at 5Gstore.com for assistance finding an appropriate solution for your application. We’re available Monday through Friday from 9am to 6pm CT at 833-547-8673 or sales@5gstore.com

The Factors Impacting Your 5G Bandwidth Speeds

The dawn of 5G promised lightning-fast internet speeds, heralding a new era of connectivity. However, the reality often falls short of these lofty expectations, leaving many users frustrated and wondering why their 5G speeds are not as blazing fast as advertised. Several factors can affect your 5G bandwidth speeds, ranging from technical limitations to network congestion. Let’s delve into some key points to understand what could be influencing your 5G experience.

Frequency Band(s) Your Modem or Phone is Connected To

One of the primary determinants of your 5G bandwidth speed is the frequency band your device is connected to. 5G operates across three main frequency bands: low, mid, and high. Each band has its advantages and limitations. Low-band 5G offers wider coverage but relatively modest speed enhancements compared to existing 4G LTE networks. Mid-band 5G strikes a balance between coverage and speed, providing faster speeds than low-band but with middling coverage. High-band, also known as mmWave, offers the highest speeds but suffers from limited coverage and poor penetration through obstacles. Therefore, your proximity to a cell tower and the band it employs can significantly impact your 5G speeds.

Limitations of Your Modem or Phone

The capabilities of your modem or phone play a crucial role in determining the speeds you can achieve. Different devices support different frequency bands, and their performance may vary accordingly. For instance, a device equipped with support for high-band frequencies will likely achieve faster speeds in areas where high-band 5G is available compared to a device limited to low-band frequencies. Upgrading to newer devices that support a wider range of frequency bands can potentially enhance your 5G experience.

User Load at the Cell Tower

Network congestion is another key factor that can affect 5G bandwidth speeds. If too many users are connected to the same cell tower simultaneously, it can lead to decreased speeds for everyone. During peak hours or in densely populated areas, the demand for bandwidth may exceed the capacity of the cell tower, resulting in slower speeds for users. Network operators are continuously expanding infrastructure and optimizing networks to mitigate congestion, but it remains a persistent challenge in densely populated areas.

Limitations on Your Data Plan

Even if your device and the network infrastructure are capable of delivering high-speed 5G connectivity, your data plan may impose limitations. Some data plans throttle speeds after reaching a certain threshold of data usage, while others prioritize certain types of traffic, such as video streaming or gaming, which can impact overall bandwidth speeds. Understanding the terms and conditions of your data plan and choosing an appropriate plan that aligns with your usage patterns is essential for maximizing your 5G experience.

The Speed of Your WiFi or Ethernet Adapter

Lastly, the speed of your WiFi or Ethernet adapter can affect the performance of your 5G connection, especially when using a home or office network. Even if you have a fast 5G connection, a slow WiFi router or Ethernet adapter can become a bottleneck, limiting the speeds you can achieve on your devices. Upgrading to newer networking equipment capable of handling higher speeds can help unleash the full potential of your 5G connection.

As you can see, achieving optimal 5G bandwidth speeds involves a combination of factors. This includes the frequency band your device is connected to, the capabilities of your device, network congestion, data plan limitations, and the speed of your networking equipment. By understanding these factors and taking appropriate measures, users can enhance their 5G experience and unlock the full potential of next-generation connectivity.

T-Mobile’s 5G Revolution: Nationwide Coverage Just Got Faster!

In a groundbreaking move, T-Mobile has announced the activation of its 2.5 GHz mid-band spectrum, acquired through FCC Auction 108 in August 2022. With over 60 million subscribers eagerly anticipating improved 5G experiences in the coming days, the Un-carrier is set to reshape the 5G landscape across the United States.

The 5G SALE Act Unleashes T-Mobile’s Potential

T-Mobile’s journey to utilize the acquired mid-band spectrum was marked by challenges. Despite winning 7,156 licenses covering 2,724 counties in the auction, the company faced regulatory hurdles. The FCC auction authority expiration and subsequent legislation, namely the 5G SALE Act, paved the way for T-Mobile to unleash the potential of its acquired licenses.

Mid-Band Spectrum: The Goldilocks of 5G

The 2.5 GHz mid-band spectrum is a big deal for T-Mobile subscribers. Unlike high-band mmWave spectrum, mid-band offers a balance between speed and coverage. It travels longer distances and is less prone to obstruction by obstacles like buildings or trees. Often referred to as the “Goldilocks of 5G spectrum,” mid-band strikes a perfect balance between the ultra-fast mmWave and the more widespread, but slower, low-band spectrum.

T-Mobile’s Ultra Capacity 5G Expansion

On March 6, 2024, T-Mobile announced a significant expansion of its Ultra Capacity 5G coverage. By activating the 2.5 GHz spectrum, the Un-carrier aims to enhance the 5G experience for tens of millions of users, particularly those in rural areas. The added capacity will result in an immediate performance boost for customers, marking a crucial step in bridging the digital divide.

Mike Sievert, CEO of T-Mobile, expressed excitement about the development, stating, “This type of execution is exactly why T-Mobile is the new network leader in the U.S., and we continue to give customers the greatest value at the same time.”

Impact on Rural Communities

T-Mobile’s strategic investment of $304 million in FCC Auction 108 covered over 7,000 county-based licenses, impacting more than 80 million people, nearly a quarter of the U.S. population. With a focus on rural areas, the Un-carrier is delivering improved connectivity and performance, fostering healthy competition and choice for millions of Americans.

In the coming days, T-Mobile will activate the spectrum, covering nearly 60 million customers over almost 300,000 square miles. The company plans to deploy the rest as new towers are built, ensuring a comprehensive and robust 5G network.

Nationwide Reach: What to Expect

Wondering if you’ll benefit from the added capacity? T-Mobile secured licenses in nearly every county across the U.S., ensuring widespread 5G coverage. Even if you aren’t in one of the 80 million+ areas directly impacted, you’re likely to experience a 5G boost wherever you go – whether traveling, working, or playing.

For example, in Louisiana, the spectrum activation will benefit customers in 92% of the counties, leading to immediate improvements in connectivity for more than 1.7 million people, with nearly 500,000 in rural areas. Similar enhancements will be seen in Pennsylvania, reaching 2.2 million people, including nearly one million in rural communities.

T-Mobile’s Unmatched 5G Network

T-Mobile’s commitment to expanding its 5G network has propelled it to the top of the industry. The Un-carrier is now crowned the overall network leader in the U.S., boasting the largest, fastest, and most awarded 5G network. With coverage extending over 330 million people across two million square miles, T-Mobile surpasses the combined reach of AT&T and Verizon. More than 300 million people nationwide are covered by T-Mobile’s super-fast Ultra Capacity 5G, with over twice the square miles of coverage compared to its closest competitors.

For those yet to experience T-Mobile’s network, the company offers a free trial with Network Pass. Users with unlocked eSIM-compatible phones can enjoy three months of T-Mobile’s unlimited smartphone data, including 5G. The transition to T-Mobile is made seamless with Easy Switch, allowing users to make the move in just minutes from their phones.

In conclusion, T-Mobile’s activation of the 2.5 GHz mid-band spectrum marks a significant milestone in the evolution of 5G connectivity across the United States. As the Un-carrier continues to enhance its network, millions of subscribers can look forward to a faster, more reliable 5G experience, solidifying T-Mobile’s position as the new leader in the U.S. telecom landscape.

Digi IntelliFlow: Mastering Data Usage Monitoring

In our interconnected world, the efficient management of data usage is paramount for the seamless operation of Internet of Things (IoT) networks. Unforeseen spikes in cellular data or unexpected surges in non-cellular internet connections can lead to financial disruptions and hinder the ability of sites to deliver essential services. Recognizing this challenge, Digi has introduced an innovative solution – Digi IntelliFlow, a robust data usage monitor and network traffic visualization tool designed to provide actionable insights into network application data.

Understanding Digi IntelliFlow

Digi IntelliFlow is a game-changer in the realm of data usage monitoring, offering an intuitive interface that empowers network managers to gain control over their networks. This cutting-edge tool focuses on the top 10 users or top 10 destinations, offering a clear representation of network activity. This visual insight allows users to adjust settings on Digi devices, optimizing their network to meet the specific data needs of the site.

Combined Power with Digi Remote Manager

Digi IntelliFlow seamlessly integrates with Digi Remote Manager, creating a powerful duo to monitor data usage effectively and prevent excessive charges. While Digi Remote Manager primarily tracks device health and status, IntelliFlow dives deeper into the traffic passing through Digi devices. This depth of analysis enables users to identify top users, spot outliers, and detect data usage trends over time.

Enhanced Monitoring Capabilities

System administrators, technical support professionals, and network administrators can leverage the combination of Digi Remote Manager and IntelliFlow to monitor devices connected to the network comprehensively. This dynamic duo allows for the review of trends and spikes, and the setting of custom alarms to receive notifications when a device approaches or exceeds monthly data limits. Of course, you may still utilize IntelliFlow from the local web user interface as well.

Group Insights for Network Optimization

Digi Remote Manager takes it a step further by aggregating individual site or device data to present usage analytics for groups of devices. This feature offers invaluable insights into network usage patterns, facilitating informed decisions for optimal network performance.

What Can I Do With IntelliFlow?

Here’s a look at the Digi IntelliFlow interface, followed by a description of the functionality:

#ComponentDescription
1Date and time selectorSelect a relative time, such as within the Last Hour, Last 30 Days, or Year to Date. Or enter a Start and End date.
2FiltersClick to expand Show Filters.
Type or select values for the appropriate filters.
Click Generate Report when finished
3Report TypeSelect the type of categorization for the report:
-Service: Displays IntelliFlow data by Service type or Port.
-Server: Displays IntelliFlow data by the destination server being contacted.
-Host: Displays IntelliFlow data by the internal host that the traffic originated from.
4Schedule ReportClick Schedule Report to open the Scheduled Report Options dialog.
5Views-Click the bar graph icon to view the data in chart format.
-Click the table icon to view the data in tabular format
6Display Options (chart view only)Click to:
-Set the unit of data to be displayed. Available values are KB, MB, GB, or TB.
-Set the number of top sources to be displayed. Available values are 5, 10, 20, or all.
-Set the sorting order. Available values are Total, Bytes Sent, Bytes Received, or Server Address.
-Download a copy of the chart in PNG, JPEG, or SVG format.
-Export the chart in comma separated value (CSV) format.
7x-axis (chart view only)-Service view: Change between Service Type and Port number. See Service type for further details.
-Server view: Change between Server Domain and Server Address.
-Host view: Change between Host Domain and Host Address.

Ideal Applications for Digi IntelliFlow

Digi IntelliFlow caters to a diverse range of industries, including retail stores, public Wi-Fi networks, transportation networks, and remote industrial sites. It is particularly beneficial for those susceptible to rogue devices connecting to their network. Additionally, businesses can deploy IntelliFlow on corporate equipment to prevent abuse or unintended network usage, offering the ability to identify and mitigate rogue devices promptly.

Why IntelliFlow?

In the age of IoT, effective data usage monitoring is not just a luxury but a necessity. Digi IntelliFlow stands out as a comprehensive solution that empowers organizations to proactively manage their networks, identify potential issues, and optimize performance. With its seamless integration with Digi Remote Manager, IntelliFlow is a vital tool for staying ahead in the ever-evolving landscape of data usage management. Embrace the power of Digi IntelliFlow and transform the way you monitor and control your network data usage.

AirLink OS 4.1.30 Upgrade Issue for Semtech (Sierra Wireless) Routers

In a recent technical bulletin released on March 4, 2024, Semtech’s Enterprise Solutions Product Management has highlighted a critical issue related to the upgrade process to AirLink OS 4.1.30. Users of Airlink RX55, XR80, and XR90 routers, particularly those who made specific configuration changes on their routers, may face a substantial challenge that could result in a loss of cellular connection.

Issue Details

The affected routers are those that had any SIMs installed while running AirLink OS 3.0 or later. Changes made to various settings, such as IPv4 and IPv6 settings, APN mode, authentication protocol settings, preferred radio technology setting, roaming settings, MTU settings, and SIM PIN settings, will revert to their default values upon upgrading to AirLink OS 4.1.30. This unexpected behavior may lead to a loss of cellular connection, disrupting crucial connectivity for users relying on Semtech routers.

Recommended Actions

Semtech is actively working on addressing this critical issue by developing a new AirLink OS 4.1.x release. As an immediate response, AirLink OS 4.1.30 has been removed from ALMS (AirLink Management Service) and the Source.

  • Users are strongly advised to upgrade to AirLink OS 5.0 if they are planning to perform an upgrade.
  • If an upgrade to AirLink OS 4.1 is necessary, it is recommended to hold off until a new version is released that addresses this specific upgrade issue.

It’s important to note that if you have already upgraded to AirLink OS 4.1.30 and your system is operating as expected, no further action is required at this time.

Transforming Networks with Digi Remote Manager

In the ever-evolving landscape of network management, Digi Remote Manager (Digi RM) stands out as a transformative technology platform that takes networks to the next level, enabling smarter operations for both networks and the individuals tasked with managing them. By seamlessly bringing together a myriad of dispersed Internet of Things (IoT) devices, Digi RM evolves them into a dynamic, intelligent network. 

Features of Digi Remote Manager

1. Effortless Device Management

Digi RM simplifies the configuration, deployment, monitoring, and management of hundreds or even thousands of mission-critical devices from a single point of command. The platform’s exclusive drag-and-drop grouping technology facilitates the auto-assimilation, updating, and deployment of devices with ease.

2. Insightful Dashboard and Reporting

The flexible Digi RM dashboard allows users to customize and position crucial information as needed. Pre-built reports with critical device health metrics can be tailored to include specific data, and alerts can be configured for specified conditions. This allows for a deeper understanding of network performance and facilitates informed decision-making.

3. Security and Compliance

Digi RM ensures an always-on, always-secure network with software-defined protection. It automatically scans and fixes any out-of-compliance device configurations in the group, maintaining the integrity of the network and alerting administrators if key settings deviate.

4. Cloud Integration

Digi RM provides pre-configured APIs that streamline the access, connection, and analysis of data collected from devices. Cloud connectors enable seamless integration with third-party analytics and visualization dashboard applications. For custom integrations, the platform offers a rich web service API.

5. Digi Containers

Digi Containers, an add-on service to Digi Remote Manager, simplifies the deployment of custom applications via containers. These containers streamline the process of building, deploying, and running custom applications on devices managed with Digi RM. Lightweight Linux Containers (LXC) tools enable developers to package custom applications, complete with dependencies, into a portable bundle.

6. WAN Bonding

Digi WAN Bonding combines multiple connections into a resilient connectivity solution, ensuring optimal performance and maximum uptime globally. Features such as Digi SureLink®, policy-based routing, and interface bonding prevent external network failures from causing downtime, providing a robust and reliable network connection.

7. Mobile VPN

Digi Mobile VPN offers a secure connection between data centers and Digi routers, including connected edge devices. Orchestrated through Digi Remote Manager, this service provides persistent, secure connectivity—a crucial feature for applications in public sectors, emergency response, and mass transit.

8. Digi Remote Manager Mobile App

The Digi RM mobile app enhances user convenience by enabling device registration via QR codes. The Configuration Manager feature allows for the automatic application of custom configurations. Users can monitor the overall health of their network and individual device statuses through the app.

5Gstore’s Utilization of Digi Remote Manager

5Gstore harnesses the power of Digi Remote Manager across various aspects of network management.

  • Configuration Management
    • 5Gstore utilizes Digi RM’s Configuration Manager for both individual devices and bulk configurations, streamlining the process of setting up and managing devices across the network.
  • Firmware Management
    • Digi RM facilitates firmware management for 5Gstore, allowing them to update firmware on individual devices or in bulk, ensuring that all devices are running the latest and most secure versions.
  • Monitoring Data Usage
    • Leveraging Digi IntelliFlow, a key feature of Digi Remote Manager, 5Gstore actively monitors data usage via alarms and network traffic visualization tools. This provides actionable insights into the network’s application data, focusing on the top 10 users or destinations.
  • WAN Bonding for Network Redundancy
    • 5Gstore employs Digi WAN Bonding to achieve resilient connectivity and maximum performance across multiple connections. This ensures that our employees’ networks remain robust and operational even in the face of connection failures.

In conclusion, Digi Remote Manager serves as a cornerstone in modern network management, empowering organizations like 5Gstore to achieve efficiency, security, and resilience in their networks. As technology continues to advance, Digi RM remains at the forefront, providing a comprehensive solution for managing the complexities of IoT devices and ensuring the seamless operation of intelligent networks.

A Guide to Planning Your SD-WAN Setup

Traditional wide-area networks (WANs) have long relied on connectivity methods such as multiprotocol label switching (MPLS) to facilitate data movement across networks. However, these methods are often costly and may not deliver the desired performance. The rise of cloud computing has spurred interest in software-defined wide-area networks (SD-WAN), offering enterprises a more flexible and efficient solution. In this article, we’ll explore the key considerations and steps involved in planning for an effective SD-WAN setup.

Understanding Network Requirements

Before diving into SD-WAN deployment, enterprises must thoroughly plan and design their network architecture. Key considerations include:

  • Network Topology: The physical and logical arrangement of nodes and connections significantly impacts network utility. Properly understanding how traffic flows through the network is essential for efficient placement of SD-WAN gateways.
  • Bandwidth: Determine the required bandwidth based on your business needs. Scalability is crucial – ensure that your SD-WAN solution is appropriately sized to accommodate network traffic.
  • Application Traffic Patterns: Recognize that different applications have varying requirements for latency, bandwidth, and security. Tailor your SD-WAN architecture to meet these specific needs. Consider features such as Load Balancing or Bonding and QoS.

Security Measures

Security is paramount in any network infrastructure. Ensure the confidentiality, integrity, and availability of your business network by thoroughly evaluating the security features of your chosen SD-WAN solution. Note that some solutions offer additional security with add-on licenses. 

Utilize the advanced firewall capabilities that fall in line with your business’s security policies and industry best practices. Seamless integration with existing security infrastructure is important to maintain a consistent level of security across the network. If you need to keep using an existing firewall while implementing new hardware for SD-WAN capabilities, consider using a feature called Drop-In Mode. This is available with Digi and Peplink hardware and would allow you to make use of Failover and Bonding features. 

Deployment Models

Consider how your SD-WAN will be deployed based on your business needs.

  • On-Premises Deployment: Ideal for enterprises with multiple physical locations like branch offices, allowing for in-house management of on-site equipment.
  • Cloud-Based Deployment: Suited for organizations with remote employees, eliminating the need for on-premises equipment and providing secure access for remote users.
  • Hybrid SD-WAN: An optimal solution for businesses supporting both branches and remote employees, combining physical devices at office locations with cloud-based access for remote users.

Feature Implementation

Implement QoS policies to prioritize critical network traffic and ensure a seamless user experience. You can prioritize certain devices, and even applications, as needed by controlling how much bandwidth is provided to each. Additionally, utilize Load Balancing to split LAN connections across different WAN services, which can help alleviate the load on one connection at a time. Or, combine WAN services via Bonding for better performance and uptime.

Testing and Validation

Before implementing SD-WAN in a production environment, run thorough testing and simulations. Conducting real-world testing to simulate network conditions ensures the solution can handle peak traffic loads and diverse application and user types. Testing failover and redundancy mechanisms help maintain network connectivity in case of device or link failures. Some products provide tools for testing network performance, which is typically available via the webUI or a cloud management service. 

Continuous Monitoring and Optimization

Admins can ensure optimal network performance by regularly monitoring network efficiency and making informed decisions for improvement. Cloud managers can assist by supporting automated alerts for critical performance thresholds. This allows admins to act quickly as issues arise. Start by establishing performance baselines to benchmark network performance, which can help identify deviations that require attention. Overall, ensure that you have visibility into all parts of the network, including WAN, LAN, and cloud deployments.

Looking for a SD-WAN Solution? Contact 5Gstore.com!

5Gstore.com has solutions available for any use case. From your home office, to a large enterprise, look no further. We have solutions available from Cradlepoint, Digi, Inseego, Peplink, and Sierra Wireless. Our team of experts are available to assist you Monday thru Friday 9am to 6pm CT at 833-547-8673. You may also reach out to sales@5gstore.com and we will follow up with you ASAP.